F02 Practice Questions and Answers
1.
Fireguards are required at all of the following locations EXCEPT:
-
A.
Hotels
-
B.
Libraries
-
C.
Theaters
-
D.
Homeless shelters
Correct Answer
B. LibrariesExplanation
Fireguards are required at all locations mentioned in the question, except for libraries. Fireguards are typically required in places where there is a higher risk of fire hazards or where large numbers of people gather, such as hotels, theaters, and homeless shelters. However, libraries are usually considered low-risk environments with fewer fire hazards, so fireguards may not be required in such establishments.Rate this question:
-
2.
All fire alarm boxes MUST be painted in ____________ color.
-
A.
Yellow
-
B.
White
-
C.
Red
-
D.
Orange
Correct Answer
C. RedExplanation
Fire alarm boxes are required to be painted in red color because red is universally recognized as the color that signifies danger and emergency. The bright red color helps to quickly identify the fire alarm boxes and alert individuals to the presence of a potential fire hazard. This standardized color coding ensures that people can easily locate and activate the fire alarm in case of an emergency, promoting safety and prompt response in such situations.Rate this question:
-
3.
Fireguards are responsiblefor knowing:
-
A.
Fire safety regulations
-
B.
Basic firefighting regulations
-
C.
Fire protection techniques
-
D.
All of the above
Correct Answer
D. All of the aboveExplanation
Fireguards are responsible for knowing all of the above because they play a crucial role in ensuring fire safety. They need to be familiar with fire safety regulations to ensure compliance and prevent potential hazards. Additionally, they should have knowledge of basic firefighting regulations to effectively respond to fires and minimize damage. Fireguards also need to be aware of fire protection techniques to prevent fires from occurring and to protect people and property. Therefore, knowing all of these aspects is essential for fireguards to carry out their responsibilities effectively.Rate this question:
-
4.
The MINIMUM number of fire alarm boxes required on each floor of a building is __________.
-
A.
1
-
B.
2
-
C.
3
-
D.
4
Correct Answer
A. 1Explanation
In order to ensure the safety of the occupants in a building, it is necessary to have at least one fire alarm box on each floor. This is because fire alarm boxes serve as a means for individuals to quickly and easily alert others in the building of a fire emergency. Having at least one fire alarm box on each floor ensures that there is a reliable and accessible means of communication in case of a fire.Rate this question:
-
5.
Interior fire alarm boxes are located at the:
-
A.
Ends of the corridors
-
B.
Entrance to restrooms
-
C.
Exits from the floor
-
D.
All of the above
Correct Answer
C. Exits from the floorExplanation
Interior fire alarm boxes are strategically placed at the exits from the floor because this ensures that they are easily accessible in case of an emergency. By locating them at the exits, it allows for quick and efficient activation of the fire alarm system, alerting occupants to evacuate the building promptly. Placing the fire alarm boxes at the ends of the corridors or entrance to restrooms may not be as effective as these locations may not be easily visible or accessible to all occupants. Therefore, placing the fire alarm boxes at the exits from the floor ensures maximum visibility and accessibility for everyone in the building.Rate this question:
-
6.
In large buildings, alarm boxes may NOT be more than ____ feet from one another.
-
A.
75
-
B.
100
-
C.
200
-
D.
250
Correct Answer
C. 200Explanation
In large buildings, alarm boxes may not be more than 200 feet from one another. This is likely because having alarm boxes placed too far apart could result in longer response times in the event of an emergency. By keeping the distance between alarm boxes within a reasonable range, it ensures that there is adequate coverage throughout the building, allowing for quick and efficient response to any potential fire or safety hazards.Rate this question:
-
7.
Alarm boxes must be mounted _____ feet above the floor.
-
A.
2.5
-
B.
3.5-5
-
C.
5.5
-
D.
3-6
Correct Answer
B. 3.5-5Explanation
Alarm boxes must be mounted at a height between 3.5 and 5 feet above the floor. This height range ensures that the alarm boxes are easily visible and accessible in case of an emergency. It allows for easy operation and maintenance of the alarm system while also keeping it out of reach of potential tampering or accidental damage.Rate this question:
-
8.
The two types of fire alarm boxes are _________ and ______________.
-
A.
Single action and double action
-
B.
Remote and local
-
C.
Direct and indirect
-
D.
Manual and automatic
Correct Answer
A. Single action and double actionExplanation
The correct answer is "single action and double action." This answer explains that there are two types of fire alarm boxes: single action and double action. Single action fire alarm boxes require only one action, such as pulling a lever or pressing a button, to activate the alarm. On the other hand, double action fire alarm boxes require two actions, such as pulling a lever and then pushing a button, to activate the alarm.Rate this question:
-
9.
Once activated, the fire alarm system can only be shut off at the _____ by using a special key.
-
A.
Alarm box
-
B.
Main control panel
-
C.
Local fire department station house
-
D.
All of the above
Correct Answer
B. Main control panelExplanation
The fire alarm system can only be shut off at the main control panel by using a special key. This is because the main control panel is the central hub for the fire alarm system, where all the alarms and sensors are connected. It is designed to be easily accessible for authorized personnel to quickly and efficiently shut off the alarm system in case of a false alarm or when the emergency situation has been resolved. The alarm box and local fire department station house may have their own control panels, but the main control panel is the primary location for controlling the entire system.Rate this question:
-
10.
In a fire emergency, building occupants must be:
-
A.
Evacuated in an orderly manner
-
B.
Instructed to remain calm
-
C.
Instructed not to use elevators
-
D.
All of the above
Correct Answer
D. All of the aboveExplanation
In a fire emergency, it is important for building occupants to be evacuated in an orderly manner to ensure their safety and prevent chaos. They should also be instructed to remain calm to avoid panic and make rational decisions. Additionally, using elevators during a fire emergency can be dangerous, so occupants should be instructed not to use them and instead use the designated evacuation routes. Therefore, the correct answer is "all of the above" as all these measures are necessary for the safety of building occupants during a fire emergency.Rate this question:
-
11.
In a fire emergency, all of the following building occupants would be immediately seriously threatened by the spread of fire EXCEPT those:
-
A.
With physical handicaps
-
B.
On the floor below the fire
-
C.
On the fire floor
-
D.
On the floor above the fire
Correct Answer
B. On the floor below the fireExplanation
In a fire emergency, the occupants on the floor below the fire would be the least immediately threatened by the spread of fire. This is because the fire is located above them and has not yet reached their floor. The occupants on the fire floor and the floor above the fire are at a higher risk as they are in closer proximity to the fire and its potential spread. However, the occupants with physical handicaps may also be immediately seriously threatened as they may face difficulties in evacuating the building quickly and safely.Rate this question:
-
12.
In a fire emergency, a fireguard's MOST effective quality is his:
-
A.
Strength
-
B.
Intellect
-
C.
Composure
-
D.
Creativity
Correct Answer
C. ComposureExplanation
In a fire emergency, a fireguard's most effective quality is his composure. This means that the fireguard remains calm and composed under pressure, allowing them to think clearly and make rational decisions. In a high-stress situation like a fire, it is crucial for the fireguard to stay level-headed and not panic, as this can help them effectively coordinate the evacuation process, communicate with others, and ensure the safety of everyone involved. Composure enables the fireguard to stay focused and take appropriate actions to minimize the damage and protect lives.Rate this question:
-
13.
In a fire emergency, the fire department may be notified by:
-
A.
Telephone
-
B.
Radio
-
C.
An exterior alarm box
-
D.
All of the above
Correct Answer
D. All of the aboveExplanation
In a fire emergency, the fire department can be notified through various means such as telephone, radio, and an exterior alarm box. These methods ensure that there are multiple ways to reach out to the fire department, increasing the chances of a prompt response. Using a telephone allows individuals to directly communicate the emergency details, while radio communication can be used by emergency personnel or witnesses to report the incident. Additionally, an exterior alarm box provides a quick and accessible way for anyone in the vicinity to alert the fire department. Therefore, all of the mentioned options are valid ways to notify the fire department during a fire emergency.Rate this question:
-
14.
An exit should be AT LEAST _____ feet wide at all locations.
-
A.
2.5
-
B.
3
-
C.
5
-
D.
6
Correct Answer
B. 3Explanation
An exit should be at least 3 feet wide at all locations to ensure that people can easily and safely evacuate a building in case of an emergency. A wider exit allows for a smoother flow of people, reduces the risk of overcrowding, and ensures that individuals with mobility constraints can navigate through the exit without difficulty. A narrower exit may impede the evacuation process and increase the likelihood of accidents or injuries.Rate this question:
-
15.
The fireguard must wait at the exterior alarm box used in an emergency in order to:
-
A.
Prevent anyone from tampering with the box.
-
B.
Organize occupants leaving the building.
-
C.
Direct firefighters to the scene of the fire.
-
D.
Prevent anyone from entering the building.
Correct Answer
C. Direct firefighters to the scene of the fire.Explanation
The fireguard must wait at the exterior alarm box used in an emergency in order to direct firefighters to the scene of the fire. This is important because the fireguard is responsible for providing crucial information to the firefighters, such as the location and severity of the fire. By waiting at the alarm box, the fireguard can quickly communicate this information to the firefighters and ensure that they are directed to the correct location, allowing them to respond effectively and efficiently to the fire.Rate this question:
-
16.
Areas that must NOT be obstructed include all of following EXCEPT:
-
A.
Windows
-
B.
Hallways
-
C.
Stairways
-
D.
Exits
Correct Answer
A. WindowsExplanation
The question asks for the area that must NOT be obstructed. Obstructing windows can be dangerous in case of emergencies as they are potential exit points and sources of natural light. Therefore, windows should not be obstructed. On the other hand, hallways, stairways, and exits should also not be obstructed as they are crucial for movement and evacuation in case of emergencies.Rate this question:
-
17.
Exit signs posted above doorways must be:
-
A.
Constructed of inflammable material
-
B.
Illuminated
-
C.
Printed in red
-
D.
All of the above
Correct Answer
B. IlluminatedExplanation
According to safety standards, exit signs must be illuminated to ensure visibility in the event of an emergency or power outage. They can be either self-illuminated or connected to a backup power source. There is no requirement that they must be printed in red (C), as different regions may use green or other colors. Additionally, they are typically constructed from materials that meet fire safety regulations, but the primary requirement is that they are visible, hence illumination is crucial.Rate this question:
-
18.
Several types of safety signs may be posted in locations throughout the building. Safety signs likely to be found describe all of the following EXCEPT:
-
A.
The location of fire extinguishers and emergency exits
-
B.
General fire safety procedures
-
C.
The type of building construction and fire prevention protection
-
D.
How to use the emergency fire alarms
Correct Answer
C. The type of building construction and fire prevention protectionExplanation
Safety signs are typically posted in buildings to provide information and instructions regarding safety measures. These signs include the location of fire extinguishers and emergency exits, general fire safety procedures, and instructions on how to use the emergency fire alarms. However, safety signs do not typically describe the type of building construction and fire prevention protection. This information is usually included in building plans and documents, but not displayed on safety signs. Therefore, the correct answer is that safety signs do not describe the type of building construction and fire prevention protection.Rate this question:
-
19.
Locks, bolts, and chains may be installed on exits when:
-
A.
There is a high risk of crime
-
B.
A building is unoccupied
-
C.
There is a security threat from striking employees
-
D.
All of the above
Correct Answer
B. A building is unoccupiedExplanation
Locks, bolts, and chains may be installed on exits when a building is unoccupied. This is because when a building is unoccupied, there is typically no need for people to enter or exit the building, and therefore, the use of locks, bolts, and chains can help enhance security and prevent unauthorized access. Additionally, by securing the exits, it reduces the risk of theft, vandalism, or other criminal activities that may occur when a building is vacant.Rate this question:
-
20.
Buildings must be checked __________ for potential fire hazards.
-
A.
Twice a day
-
B.
Daily
-
C.
Weekly
-
D.
Monthly
Correct Answer
B. DailyExplanation
Buildings must be checked daily for potential fire hazards to ensure the safety of occupants and prevent any potential fire incidents. Daily inspections allow for early detection of any fire hazards such as faulty electrical wiring, blocked fire exits, or flammable materials, allowing prompt action to be taken to mitigate the risks. Regular and frequent inspections are crucial to maintain a safe environment and comply with fire safety regulations.Rate this question:
-
21.
Fire alarm boxes must be tested:
-
A.
Daily
-
B.
Weekly
-
C.
Monthly
-
D.
Every six months
Correct Answer
A. DailyExplanation
Fire alarm boxes must be tested daily to ensure they are in proper working condition and can effectively alert occupants in case of a fire. Daily testing helps identify any malfunctions or faults in the system promptly, allowing for immediate repairs or replacements. Regular testing also ensures that the alarms are loud enough and can be heard throughout the building. This frequent testing schedule helps maintain the overall safety of the premises and reduces the risk of fire-related accidents.Rate this question:
-
22.
Any leaks or breaks in the piping, tanks, valves, etc. of a sprinkler system must be:
-
A.
Repaired immediately
-
B.
Noted in the inspection log
-
C.
Reported to the local fire department company immediately
-
D.
Checked to ensure the do not affect the system's operation
Correct Answer
C. Reported to the local fire department company immediatelyExplanation
Any leaks or breaks in the piping, tanks, valves, etc. of a sprinkler system must be reported to the local fire department company immediately. This is important because any damage to the system can compromise its effectiveness in suppressing fires. By reporting the leaks or breaks promptly, the fire department can take appropriate action to repair the system and ensure it is fully operational. This helps to maintain the safety and functionality of the sprinkler system, reducing the risk of fire-related incidents.Rate this question:
-
23.
Fire extinguishers must be inspected:
-
A.
Weekly
-
B.
Monthly
-
C.
Every six months
-
D.
Yearly
Correct Answer
B. MonthlyExplanation
Fire extinguishers require monthly inspections to ensure they're operational. These checks involve verifying their location, pressure gauge, and physical integrity. Regular inspections guarantee readiness during emergencies, ensuring extinguishers are functional, comply with regulations, and contribute to overall fire safety measures in various settings.Rate this question:
-
24.
AClass Afire condition exist when ____ is (are) ignited.
-
A.
Flammable liquids or greases
-
B.
Wood or paper
-
C.
Electrical equipment
-
D.
Explosive chemicals
Correct Answer
B. Wood or paperExplanation
A Class A fire condition exists when wood or paper is ignited. Class A fires involve ordinary combustible materials such as wood, paper, cloth, and some plastics. These fires typically leave behind ash and char after burning. Flammable liquids or greases, electrical equipment, and explosive chemicals are not associated with Class A fires, as they fall into different fire classifications (Class B, C, and D, respectively).Rate this question:
-
25.
Class A fires should be extinguished with:
-
A.
Water
-
B.
Carbon dioxide
-
C.
Dry chemicals
-
D.
Foam
Correct Answer
A. WaterExplanation
Water is the correct answer for extinguishing Class A fires. Class A fires involve ordinary combustible materials such as wood, paper, cloth, and plastics. Water is effective in extinguishing these fires as it cools down the fuel and removes heat, thus preventing the fire from spreading. Additionally, water helps to smother the flames by creating a barrier between the fuel and the oxygen in the air. It is important to note that water should not be used for extinguishing fires involving electrical equipment or flammable liquids, as it can cause further damage or spread the fire.Rate this question:
-
26.
Class C fires should NOT be extinguished with:
-
A.
Water
-
B.
Foam
-
C.
Oxygen
-
D.
All of the above
Correct Answer
D. All of the aboveExplanation
Class C fires involve energized electrical equipment, such as appliances, wiring, or circuit breakers. Water and foam are conductive and can create a risk of electrical shock if used to extinguish these fires. Oxygen supports combustion, so introducing it to a fire can make it spread or intensify. Therefore, all of the above options should not be used to extinguish Class C fires.Rate this question:
-
27.
Symbols painted on fire extinguishers indicate the:
-
A.
Type of extinguishing agent
-
B.
Type of fire that the extinguisher may be used on
-
C.
Amount of extinguishing agent contained
-
D.
All of the above
Correct Answer
B. Type of fire that the extinguisher may be used onExplanation
The symbols painted on fire extinguishers indicate the type of fire that the extinguisher may be used on. These symbols are universally recognized and help users identify the appropriate extinguisher for a specific type of fire, such as electrical fires, flammable liquid fires, or combustible material fires. By understanding the symbols, users can effectively and safely extinguish fires by using the correct type of extinguisher.Rate this question:
-
28.
Sprinkler heads are activated by:
-
A.
Heat
-
B.
Smoke
-
C.
Oxygen content
-
D.
All of the above
Correct Answer
A. HeatExplanation
Sprinkler heads are activated by heat. When the surrounding temperature reaches a certain level, the heat-sensitive element in the sprinkler head expands, allowing water to flow through the sprinkler system and extinguish the fire. This mechanism ensures that the sprinkler system is only activated when there is a fire present, preventing unnecessary water damage in case of false alarms. Smoke and oxygen content are not directly involved in activating sprinkler heads, making the correct answer "heat".Rate this question:
-
29.
Sprinklerheads that have been activated must be:
-
A.
Repaired
-
B.
Replaced
-
C.
Reset
-
D.
Inspected
Correct Answer
B. ReplacedExplanation
When sprinkler heads are activated, it usually means that there has been some kind of damage or malfunction. Repairing the sprinkler heads may not be sufficient to ensure their proper functioning in the future. Therefore, it is necessary to replace the activated sprinkler heads with new ones to ensure the effective and reliable operation of the sprinkler system.Rate this question:
-
30.
A set of ____ extra sprinkler heads must ALWAYS be kept on the premises if there is a sprinkler system.
-
A.
6
-
B.
10
-
C.
12
-
D.
15
Correct Answer
A. 6Explanation
A set of 6 extra sprinkler heads must ALWAYS be kept on the premises if there is a sprinkler system. This is because having extra sprinkler heads ensures that any damaged or malfunctioning sprinkler heads can be replaced immediately, maintaining the effectiveness of the sprinkler system in case of a fire. Having 6 extra sprinkler heads is considered sufficient for most standard-sized sprinkler systems.Rate this question:
-
31.
In a standpipe system, water is sprayed onto a fire through:
-
A.
Sprinkler heads
-
B.
A self-contained canister
-
C.
A hose and nozzle
-
D.
None of the above
Correct Answer
C. A hose and nozzleExplanation
In a standpipe system, water is sprayed onto a fire through a hose and nozzle. A standpipe system is a type of fire protection system that consists of pipes and outlets connected to a reliable water supply. The hose and nozzle are used to deliver water directly to the fire, allowing firefighters to control and extinguish the flames. Sprinkler heads are not used in standpipe systems, as they are typically found in automatic sprinkler systems. Similarly, a self-contained canister is not used in standpipe systems for firefighting purposes.Rate this question:
-
32.
A fire extinguisher's charge can be checked by ____ the extinguisher.
-
A.
Weighing
-
B.
Shaking
-
C.
Checking the gauge on
-
D.
All of the above
Correct Answer
C. Checking the gauge onExplanation
The correct answer is "checking the gauge on". This is because the gauge on a fire extinguisher provides a visual indication of the pressure level inside the extinguisher. By checking the gauge, one can determine if the extinguisher is properly charged and ready for use. Weighing and shaking the extinguisher can also provide some indication of the charge, but the most accurate and reliable method is to check the gauge.Rate this question:
-
33.
Fire extinguishers are GENERALLY inspected by:
-
A.
The fireguard
-
B.
A representative of the company that holds the maintenance contract for the fire extinguishers
-
C.
A representative of the fire department
-
D.
A licensed pubic inspector
Correct Answer
B. A representative of the company that holds the maintenance contract for the fire extinguishersExplanation
Fire extinguishers are generally inspected by a representative of the company that holds the maintenance contract for the fire extinguishers. This is because the company responsible for the maintenance contract has the expertise and knowledge to properly inspect and maintain the fire extinguishers. They have the necessary training and equipment to ensure that the fire extinguishers are in good working condition and ready to be used in case of a fire emergency. The company representative will check for any damages, ensure that the extinguishers are properly charged, and perform any necessary maintenance or repairs.Rate this question:
-
34.
An OS&Y valve controls:
-
A.
Water pressure
-
B.
Water volume
-
C.
The main supply of water into sprinkler or standpipe systems
-
D.
None of the above
Correct Answer
C. The main supply of water into sprinkler or standpipe systemsExplanation
An OS&Y valve controls the main supply of water into sprinkler or standpipe systems. This type of valve is specifically designed to allow for easy visual confirmation of whether the valve is open or closed. It is commonly used in fire protection systems to regulate the flow of water in emergency situations. By controlling the main water supply, the OS&Y valve ensures that water can be quickly and effectively distributed to the sprinkler or standpipe systems in case of a fire.Rate this question:
-
35.
An OS&Y valve must be sealed in the ____ position.
-
A.
Open
-
B.
Closed
-
C.
On
-
D.
Off
Correct Answer
A. OpenExplanation
An OS&Y valve must be sealed in the open position to allow the flow of fluid or gas through the valve. When the valve is open, it creates a pathway for the substance to pass through, while in the closed position, it blocks the flow completely. The terms "on" and "off" do not specifically refer to the position of the valve, whereas "open" and "closed" clearly indicate the state of the valve. Therefore, the correct answer is open.Rate this question:
-
36.
An OS&Y valve is GENERALLY sealed with a:
-
A.
Padlock and chain
-
B.
Fusable plug
-
C.
Gasket and locking washer
-
D.
All of the above
Correct Answer
A. Padlock and chainExplanation
An OS&Y (Outside Screw and Yoke) valve is generally sealed with a padlock and chain. This method ensures that the valve cannot be operated or tampered with without the key to the padlock. The padlock and chain provide a physical barrier to prevent unauthorized access or accidental operation of the valve. This is a common practice in industries where safety and security are of utmost importance.Rate this question:
-
37.
Most sprinkler and standpipe systems must be inspected:
-
A.
Every six months
-
B.
Yearly
-
C.
Every two years
-
D.
Every five years
Correct Answer
B. YearlyExplanation
Sprinkler and standpipe systems need to be inspected on a yearly basis. This regular inspection ensures that the systems are in proper working condition and can effectively respond to any fire emergencies. Yearly inspections help identify any potential issues or malfunctions, allowing for timely repairs or replacements. This proactive approach helps maintain the reliability and functionality of the systems, ensuring the safety of the premises and its occupants.Rate this question:
-
38.
When a part of the sprinkler or standpipe system is shut down for repairs, the fireguard must:
-
A.
Maintain a position in view of the section being repaired
-
B.
Make an appropriate entery into his logbook
-
C.
Notify the fire department
-
D.
All of the above
Correct Answer
C. Notify the fire departmentExplanation
When a part of the sprinkler or standpipe system is shut down for repairs, it is important for the fireguard to notify the fire department. This is necessary because the fire department needs to be aware of any changes or disruptions in the fire protection system. By notifying the fire department, they can take appropriate measures to ensure the safety of the building and its occupants during the repair process. This includes potentially assigning additional personnel or resources to the area, or implementing alternative fire safety measures to compensate for the temporarily disabled system.Rate this question:
-
39.
The reason for the above requirement is to:
-
A.
Ensure that the reapirs are done correctly and promptly
-
B.
Record the situation for future reference
-
C.
Allow the fire department to adjust its firefighting strategies
-
D.
All of the above
Correct Answer
D. All of the aboveExplanation
The requirement mentioned in the question serves multiple crucial purposes. Firstly, it ensures that repairs are carried out correctly and promptly, contributing to the safety and functionality of the affected system or equipment. Secondly, recording the situation for future reference is essential for documentation, analysis, and learning from past experiences, which can aid in making informed decisions and preventing similar issues in the future. Lastly, allowing the fire department to adjust its firefighting strategies based on the gathered information can be a vital aspect of improving emergency response and ensuring the safety of both responders and the community. Therefore, the requirement encompasses these three significant objectives, making them all equally important.Rate this question:
-
40.
General safeguards against fire hazards include all of the following EXCEPT:
-
A.
Safe storage of flammables and combustibles
-
B.
Prompt removal of trash
-
C.
Use of only approved electrical equipmant
-
D.
No smoking in public buildings
Correct Answer
C. Use of only approved electrical equipmantExplanation
The options listed mostly provide general safety practices to prevent fires, but "use of only approved electrical equipment" might not be considered a general safeguard against fire hazards in the same broad sense as the others. This is because it specifically relates to compliance with regulations and standards for electrical devices, which is a specific aspect of fire safety focused more on electrical safety compliance rather than general fire prevention practices like managing flammables or housekeeping. Thus, while important, it might be seen as more specific to electrical safety than a general fire hazard precaution, making it slightly less aligned with the other options that apply more universally across various settings.Rate this question:
-
41.
Potential sources of electrical fires do NOT include:
-
A.
Frayed wires
-
B.
Defective fire extinguishers
-
C.
Pennies substituted for fuses
-
D.
Defective appliances
Correct Answer
B. Defective fire extinguishersExplanation
Defective fire extinguishers are not a potential source of electrical fires because they are designed to put out fires, not cause them. The other options listed - frayed wires, pennies substituted for fuses, and defective appliances - are all potential sources of electrical fires because they involve faulty electrical components or unsafe practices.Rate this question:
-
42.
If the alarm or sprinkler system is out of service, fireguards must be on duty:
-
A.
Until all employees have left the building
-
B.
From 6:00 A.M until 10:00 P.M.
-
C.
From 7:00 A.M until 9:00 P.M.
-
D.
24 hours a day
Correct Answer
D. 24 hours a dayExplanation
Fireguards must be on duty 24 hours a day if the alarm or sprinkler system is out of service. This means that they need to be present and alert at all times to ensure the safety of the building and its occupants in case of a fire. It is important to have someone continuously monitoring and responding to any potential fire hazards or emergencies when the usual safety systems are not functioning properly.Rate this question:
-
43.
Fire wardens and deputy fire wardens are GENERALLY:
-
A.
Members of the local fire department
-
B.
Hired in response to specific conditions
-
C.
Trained volunteers provided by building tenants
-
D.
Required in buildings over 100 feet in height
Correct Answer
C. Trained volunteers provided by building tenantsExplanation
Fire wardens and deputy fire wardens are trained volunteers provided by building tenants. They are not members of the local fire department or hired in response to specific conditions. Fire wardens are typically appointed by building owners or managers to assist in fire safety and emergency evacuation procedures. They receive specific training to fulfill their responsibilities, such as conducting regular fire drills, ensuring fire safety equipment is in working order, and assisting with evacuations during emergencies. Their role is crucial in ensuring the safety of building occupants in case of a fire.Rate this question:
-
44.
The fire safety plan must be approved by the fire _______________.
-
A.
Department
-
B.
Commissioner
-
C.
Guard
-
D.
All of the above
Correct Answer
A. DepartmentExplanation
The fire safety plan must be approved by the fire department because they are responsible for ensuring the safety of the public in case of a fire. The fire department has the expertise and knowledge to review and assess the plan to ensure that it meets all necessary safety standards and regulations. The approval from the fire department is crucial to ensure that the plan is effective in preventing and responding to fires.Rate this question:
-
45.
Fireguards on office building duty must patrol the entire building AT LEAST:
-
A.
Once every hour
-
B.
Once every two hours
-
C.
Twice a day
-
D.
Once a day
Correct Answer
A. Once every hourExplanation
Fireguards on office building duty must patrol the entire building at least once every hour to ensure the safety of the occupants and to promptly identify and address any potential fire hazards or emergencies. This frequent patrol schedule allows them to quickly respond to any developing situations and take necessary actions to prevent or mitigate the spread of fire. By conducting regular patrols, they can also ensure that all fire safety measures, such as fire extinguishers and emergency exits, are in proper working condition and accessible to everyone in the building.Rate this question:
-
46.
Areas where accumulated garbage present a particular fire hazard are in:
-
A.
Private offices
-
B.
Kitchens
-
C.
Restrooms
-
D.
Hallways
Correct Answer
B. KitchensExplanation
Accumulated garbage in kitchens can present a particular fire hazard due to the presence of flammable materials such as food waste, grease, and packaging. If not properly managed and disposed of, these materials can easily catch fire and spread rapidly. Kitchens also typically have appliances such as stoves and ovens, which can further contribute to the risk of fire if not maintained and cleaned regularly. Therefore, it is important to ensure that garbage is promptly and properly disposed of in kitchens to minimize the potential fire hazard.Rate this question:
-
47.
During his patrol, the fireguard must ____ inspect all fire protection devices.
-
A.
Manually
-
B.
Physically
-
C.
Visually
-
D.
All the above
Correct Answer
C. VisuallyExplanation
The fireguard is required to visually inspect all fire protection devices during his patrol. This means that they must physically look at each device and assess its condition or functionality. Manually and physically could imply a more hands-on approach, but visually specifically emphasizes the act of using their eyes to inspect the devices. Therefore, visually is the correct answer.Rate this question:
-
48.
A Class B fire condition exist when ____ is (are) ignited.
-
A.
Flammable liquids and greases
-
B.
Wood or paper
-
C.
Electrical equipment
-
D.
Plastics
Correct Answer
A. Flammable liquids and greasesExplanation
A Class B fire condition exists when flammable liquids and greases are ignited. This means that if substances such as gasoline, oil, or cooking oils catch fire, it would be classified as a Class B fire. These types of fires require specific fire extinguishing agents, such as foam or carbon dioxide, to effectively suppress and extinguish the flames.Rate this question:
-
49.
Class B fires should NOT be extinguished with:
-
A.
Water
-
B.
Carbon dioxide
-
C.
Dry chemicals
-
D.
Foam
Correct Answer
A. WaterExplanation
Water should not be used to extinguish Class B fires because it can spread the fire and cause it to become more dangerous. Class B fires involve flammable liquids such as gasoline, oil, or alcohol, and water can cause these liquids to splash and spread the fire. Instead, dry chemicals, foam, or carbon dioxide should be used to extinguish Class B fires as they are more effective in smothering the flames and preventing re-ignition.Rate this question:
-
50.
A Class C fire condition exists when ____ is (are) ignited.
-
A.
Flammable liquids or greases
-
B.
Wood or paper
-
C.
Electrical equipment
-
D.
Plastics
Correct Answer
C. Electrical equipmentExplanation
A Class C fire condition exists when electrical equipment is ignited. This means that if a fire breaks out in any electrical equipment, such as appliances, wiring, or circuit breakers, it would be classified as a Class C fire. It is important to use appropriate fire extinguishing agents, such as carbon dioxide or dry chemical extinguishers, to safely extinguish a Class C fire without risking electrical shock.Rate this question:
-